Ubiquiti POE-24-24W-5P | PoE Power supply | 24V, 1A, 24W, 5-pack

PoE Power Supply with Protection for Network Devices

Ubiquiti POE-24-24W-5P is a set of five PoE power supplies designed for devices requiring 24 V power. Each adapter provides 24 V output voltage, 1 A current and 24 W power, and its design includes two Fast Ethernet RJ45 ports and an LED indicating operation. This allows you to conveniently power compatible network devices, including base stations, without running a separate power cable to each one.

Key advantages

• Set of 5 – lets you equip several stations or keep spare adapters for installation expansion.
• 24 V, 1 A and 24 W power – supports devices compliant with the requirements of this PoE power standard.
• Surge and ESD protection – helps reduce the risk of damage caused by electrostatic discharge and surges.
• LED indicator – makes it easy to quickly check for power presence.
• Two Fast Ethernet RJ45 ports – allow network cables to be connected to the adapter.
• Grounded AC cable – supports safe connection of the power supply to the electrical installation.

Protection of the connection and devices

The PoE adapter has been equipped with solutions supporting the protection of network devices connected in the installation. This includes surge protection, protection in differential and common mode, and clamp protection for the data and power path. In combination with the Ubiquiti TOUGHCable cable, the adapter helps reduce the effects of electrostatic discharge, which can cause failures in devices operating outdoors. Response time below 1 ns supports rapid operation of the protection circuit.

Practical use in installation

The set will be useful when you need to power several compatible network devices requiring 24 V. The adapter delivers power through the wire pairs pins 4 and 5 (+) and 7 and 8 (-), and the two RJ45 ports make it easy to include it in the connection path. The LED indicator lets you quickly check the power status without additional tools. Thanks to the set of five, you can organise an installation covering several access points or base stations.

Operating and storage conditions

The adapter can operate at temperatures from 0 to 40°C and at relative humidity from 35 to 95%, without condensation. Such parameters make it easy to adapt it to typical indoor installation conditions. During transport or storage, the device withstands a range from -30 to 70°C. The compact design with dimensions of 100 × 250 × 250 mm and a single device weight of 158.5 g makes it easy to place the adapters in a technical room.

Specification