BETAFPV AIR65 II FREESTYLE ELRS 2.4G
EAN: 0795986631361
Reference: RDAIR65V2F
Warranty and service support
Available options and delivery cost
Same-day shipping
Payments methods

Power and durability in a lightweight design
Air65 II Brushless Whoop Quadcopter is a whoop racing drone for indoor flying and short FPV runs. It combines an ultra-lightweight design with a reinforced build, so it stays agile while also coping better with impacts. It is a good choice for pilots who expect quick stick response and stable performance in tight spaces.

Key benefits
- Three flight configurations – choose the version to suit your flying style: racing, technical flying or smooth freestyle.
- 0702 brushless motors – enjoy rapid acceleration and better throttle control.
- Matrix 5IN1 II FC – get a stronger control system with 12 A continuous ESC.
- 3-point mounting – the frame withstands impacts better and reduces the risk of damage to the electronics.
- Reinforced 1.0 mm PCB – the structure performs more reliably during frequent landings and collisions.
- Adjustable 15°–45° camera angle – set the view for calm cruising or dynamic racing.

Three drive versions
The model comes in three variants: Champion, Racing and Freestyle. Each has a different motor and propeller combination, so the drone responds according to its intended use. The Champion version focuses on maximum thrust, Racing on sharp throttle response, and Freestyle on smoothness and energy efficiency.

0702 brushless motors
The 0702 Brushless Motors (2026) used in the series feature a 0.1 mm stator core and matched magnetic and winding solutions. In practice, this translates into more efficient power delivery and better response to changes in speed. In the Champion version, the combination of 0702 36000KV motors and GF 1207 3-B propellers delivers the highest thrust, while Racing and Freestyle offer a more controlled flying feel.

More stable electronics
Matrix 5IN1 II FC combines the flight controller, receiver and ESC in one compact design. 12 A of continuous current provides headroom during aggressive manoeuvres, and the 3-point mounting reduces the transfer of impact energy to the board. As a result, the equipment stays flight-ready for longer, and the user spends less time on repairs after a crash.

Reinforced camera canopy
The Air II Canopy uses improved materials and extra reinforcement in key areas. The revised profile improves camera protection during contact with obstacles, and the angle adjustment from 15° to 45° makes it easier to match the view to your flying style. It is a practical solution when you want to move more quickly from indoor practice to more dynamic flights.

Frame for frequent impacts
The Air65 II / Champion Frame has optimised ducts, stiffening connectors and a PP blend that increases resistance to loads during landings and collisions. In the Champion version, the thrust-to-weight ratio is 6.3:1, so the drone picks up speed quickly and comes out of tight turns much better. This kind of performance is ideal where quick flight-path correction and confidence in confined spaces matter most.

Choose your style
Air65 II offers three distinct flight characteristics, so you do not have to adapt to just one setup. Champion delivers a strong launch and aggressive dynamics, Racing gives a quick response on technical sections, and Freestyle maintains the smoothness needed for more cinematic flying. This makes it easier to choose a configuration for your skill level and type of track without compromising handling.

Package contents
Air65 II Brushless Whoop Quadcopter | Champion
- 1 * Air65 II Brushless Whoop Quadcopter | Champion
- 4 * GF 1207 3-B propellers
- 4 * M1.4*2 screws
- 1 * Air II Canopy
- 2 * M1.4*5 self-tapping screws
- 4 * M1.4*4 self-tapping screws
- 2 * H0.8 damping balls
- 1 * Type-C to SH1.0 adapter board
- 1 * SH1.0-4Pin adapter cable

Air65 II Brushless Whoop Quadcopter | Racing
- 1 * Air65 II Brushless Whoop Quadcopter | Racing
- 4 * GF 1207 3-B propellers
- 4 * M1.4*3 screws
- 1 * Air II Canopy
- 2 * M1.4*5 self-tapping screws
- 4 * M1.4*4 self-tapping screws
- 2 * H0.8 damping balls
- 1 * Type-C to SH1.0 adapter board
- 1 * SH1.0-4Pin adapter cable

Air65 II Brushless Whoop Quadcopter | Freestyle
- 1 * Air65 II Brushless Whoop Quadcopter | Freestyle
- 4 * GF 1219S 3-B propellers
- 4 * M1.4*3 screws
- 1 * Air II Canopy
- 2 * M1.4*5 self-tapping screws
- 4 * M1.4*4 self-tapping screws
- 2 * H0.8 damping balls
- 1 * Type-C to SH1.0 adapter board
- 1 * SH1.0-4Pin adapter cable

| Parameter | Champion | Racing | Freestyle |
|---|---|---|---|
| Weight | 16.6g | 17.7g | 17.8g |
| Frame | Air65 Champion | Air65 II | |
| Antenna | Whip | Copper pipe | |
| Wheelbase | 65mm | ||
| Canopy | Air II Canopy | ||
| Flight controller (FC) | Matrix 1S 5IN1 II | ||
| ESC | 1S 12A | ||
| VTX (video transmitter) | Integrated 5.8G 25mw~400mw | ||
| Receiver (RX) | Integrated Serial ELRS 2.4G | ||
| Camera | C03 | ||
| Motors | Champion 0702 (36000KV) - dual ball bearings | Racing 0702 (30000KV) - brass bushings | Freestyle 0702 (25000KV) - brass bushings |
| Motor connection | Soldered | JST1.25 3Pin connector | JST1.25 3Pin connector |
| Propellers | GF 1207 3-B | GF 1207 3-B | GF 1219S 3-B |
| Flight time (with LAVA II 1S 320mAh battery) | 4:40 | 4:30 | 5:00 |
| Battery connector | BT2.0 U Cable Pigtail | ||
| Recommended battery | LAVA II 1S 280mAh/320mAh | ||




























