Ubiquiti NBE-5AC-GEN2 | CPE | NanoBeam, 5GHz, 1x RJ45 1000Mb/s, 19dBi

EAN: 0810354026348

Reference: NBE-5AC-GEN2-EU

402.44 zł gross gross / meter 327,19 zł netto gross / piece

Availability Quite a few

Payments methods

przelewy.jpg google-pay.jpg apple-pay.jpg mastercard.jpg visa.jpg blik.jpg mbank.jpg paypo.jpg payu.jpg

High performance airMAX® ac Bridge

NBE-5AC-GEN2 is an innovative radio system working in the 5GHz frequency band. The device is ideal for CPE applications requiring maximum performance with the smallest possible footprint. NanoBeam 5AC Gen 2 directs RF energy into a narrower beam. NanoBeam 5AC Gen 2 blocks or spatially eliminates noise to improve immunity against interference by focusing on one direction. This function is particularly important in areas crowded with other RF signals of the same or similar frequency.

Combined Design

The radio and the antenna are combined to create a more efficient and compact CPE. Providing high performance and innovative design, the NanoBeam 5AC Gen 2 is versatile and cost-effective.

Breakthrough performance

AirMAX AC supports high data rates that require dense modulation: 256QAM - a significant increase from 64QAM, which is used in airMAX. AirMAX AC products support actual TCP/IP bandwidth of 450+ Mb/s thanks to the use of airMAX AC technology. This means throughput 3 times higher than in products with regular airMAX technology. Moreover, airMAX® AC products offer increased resistance to interference.

Advanced technology

AirMAX® Ubiquiti technology has been proven in millions of applications worldwide, demonstrating exceptional performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.

Access to airOS via Wi-Fi

The U®Mobile application provides instant access to the AirOS interface configuration via Android and iOS devices. UMobile allows you to install, configure and manage your NanoBeam 5AC Gen 2 and offers various configuration options once you connect or log in.

Plug and Play installation

NanoBeam AC can mounted on different surfaces (e.g. columns and walls) and offers freedom of tri-axial alignment. No screws are required to mount it to a pole, whereas one wall screw is required to mount it on a wall.

Regulatory Approvals CE, FCC, IC, RoHS
Product type Network bridge
Height 125 mm
LED indicators LAN
Modulation 16-QAM
Width 189 mm
Depth 189 mm
Security algorithms WPA2
Surge protection voltage Yes
RAM type DDR2
Cables included AC
Compliance certificates CE
Maximum data transfer rate 450 Mb/s
Power consumption (max) 8.5 W
Humidity measurement range 5 – 95%
Operating temperature (T-T) -40 to 80 °C
-40 to 176 °F
Harmonized System (HS) code 85176990
Ethernet LAN interface type Gigabit Ethernet
Ethernet LAN (RJ-45) ports 2
Antenna gain level (max) 19 gain
DC output current 0.5 A
Flash memory 8 MB
Processor family Atheros
Material Plastic
Reset button Yes
Processor frequency 720 MHz
Web-based management Yes
DC output voltage 24 V
Mounting bracket(s) included Yes
Power over Ethernet (PoE) Yes
PoE+ Injector(s) Yes
Internal memory 128 MB
Wi-Fi Yes
Ethernet LAN Yes
Processor model MIPS 74Kc
Power source type PoE
Product colour White
Maximum transfer distance 15000 m
Mounting hardware type Wall/Pole
Product weight 530 g

Information about responsible entities

Ubiquiti Networks Sro Manufacturer

Country: CZ
Street: Plzenska 345/5
Postal Code: 150 00
City: Praha

Mail: direct@ui.com


Loading...