MikroTik RouterBoard Fiber to Copper Converter (RBFTC11) is fiber optic converter. It converts fiber optic signal to transmission via Ethernet cable.
Unlike many other converters available on the market, the device has been equipped with a waterproof, screw-fastened casing adapted to various weather conditions for outdoor use. The device comes with a bracket for mounting on a wall, post or din rail.
The converter supports PoE 802.3af/at (12-57V) power supply standard. RBFTC11 supports only Gigabit fiber optic transmission (1000Base-X) and Ethernet port (10/100/1000Mps.) has automatic negotiation.
| Features / filters | |
| Data transmission speed | Gigabit Ethernet |
| Type of fiber optic connector | SFP slot |
| Connectivity technology | Wired |
| Depth | 85 |
| Ethernet interface type | Gigabit Ethernet |
| Ethernet LAN (RJ-45) ports | 1 |
| Ethernet LAN data rates | 10,100,1000 |
| Fiber optic connector | SFP |
| Fiber ports quantity | 1 |
| Height | 30 |
| Internal | No |
| Networking standards | IEEE 802.3af |
| Power over Ethernet (PoE) | Yes |
| Product colour | White |
| Width | 185 |
| Product code | RBFTC11 |
| 10/100/1000 Ethernet ports | 1xRj45 |
| Can be used indoors | Yes |
| Can be used outdoors | Yes |
| Case law | " RED, EAC, ROHS |
| Input voltage | 12–57 V. |
| Maximum energy consumption | 3 W. |
| Operating temperature | From -40 to 70 degrees C |
| PoE in | 802.3af / at |
| Ports SFP | 1 (1.25Gbit port) |
| Storage size | 1 KB |
| Dimensions | 185x85x30 mm |
| Fibre optic connector | SFP |
| Set composition | The device 0.8A 24V power supply Gigabit PoE injector WAP holder K35 putty |
| Brochure (ENG) | Download |
Converts a fiber optic signal into an Ethernet cable transmission.
SFPs allow you to connect the mainboard of a switch, router or other device to a fiber optic or copper cable
PoE allows you to use a single cable for power and data transmission, saving you money on purchasing and dragging cables for network devices and VoiP phones.
