ZYXEL GS1900-10HP | Switch | 8x RJ45 1000Mb/s PoE, 2x SFP, 77W, managed

EAN: 4718937587810

Reference: BATZYXGS1900-10HP

510.40 zł gross gross / meter 414,96 zł netto gross / piece

Availability No product

Payments methods

przelewy.jpg google-pay.jpg apple-pay.jpg mastercard.jpg visa.jpg blik.jpg mbank.jpg paypo.jpg payu.jpg

Zyxel GS1900-10HP - 10-port manageable switch

The Zyxel GS1900 series is a compact, gigabit freestanding switch with a rack mount option that allows you to create a high-speed network in a convenient location, e.g. in offices and other rooms. They offer full IPv6 support and are compatible with the latest IEEE 802.3at PoE (Power over Ethernet) Plus standard, up to 30 W per port, allowing you to connect multiple Ethernet powered devices. The intelligent Zyxel PoE function has two power modes: classification and consumption. In the consumption mode, GS1900 8HP/10HP/24HP/48HP models reserve the required amount of power and prioritize the power supply on the ports in order to optimally distribute the power budget. This allows more connected devices to operate and increases the (ROI) return on investment. The GS1900-10HP model supports IEEE 802.3at on all ports with a 77W power supply for 8 ports and an additional 2 SFP slots for long-distance connections.

gs1900-10hp gigabit switch

Configuration assistant

The Series of Zyxel GS1900 Switches has an interface for configuration and management via a web browser. This allows you to quickly and comfortably configure the network in four steps: initial settings, i.e. VLAN, Guest VLAN and QoS.

gs1900-10hp switch

Energy saving

Switches series GS1900 have been equipped with technological solutions that contribute to the reduction of energy consumption:

  • Low link activity detection in 802.3az Energy Efficient Ethernet (EEE) - low network traffic is detected and switch can adjust the power consumption of the link. The 802.3az function switch is located on the housing.
  • Detection of inactive connectors - thanks to the detection of inactive connections or devices the power consumption will be reduced.
  • Detection of wire length - this function adjusts the power consumption based on the detected distance from the connected device, reducing it for nearby connections.
  • No fans - silent operation is ensured by the design without active cooling, making GS1900 switches suitable for small rooms.
Regulatory Approvals CE, FCC, C-Tick, BSMI CNS13438
Buffer size 525 KB
Height 27 mm
Input voltage 54 V
LED indicators Yes
Wall mountable Yes
Width 250 mm
Depth 104 mm
Security algorithms 802.1x RADIUS
Mean time between failures (MTBF) 801.113 h
Input current 1.7 A
Storage temperature (T-T) -40 to 70 °C
Rack mounting No
Package weight 1530 g
MIB support RFC 1213, RFC 2819, RFC 1215, RFC 1493
Console port RJ-45
Power consumption (typical) 96.2 W
Humidity measurement range 10 – 95%
Harmonized System (HS) code 85176990
Switching capacity 20 Gb/s
Networking standards IEEE 802.1D
Switch type Managed
10G support No
Operating temperature (T-T) 0 – 50 °C
Package depth 227 mm
Package height 64 mm
Safety LVD EN60950-1, BSMI CNS14336-1, CB IEC60950-1
Heat dissipation 65.472 British thermal unit per hour
Package width 302 mm
Quality of Service (QoS) support Yes
Total Power over Ethernet (PoE) budget 77 W
Management protocols SNMP, RMON, ICMP, Syslog
IGMP snooping Yes
Web-based management Yes
Jumbo frames 9000
MAC address table 8000 entries
Power over Ethernet (PoE) ports quantity 8
Power over Ethernet (PoE) Yes
SFP module slots quantity 2
System event log Yes
Copper ethernet cabling technology 1000BASE-T
Product colour Black
Switch layer L2+
Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity 8
Product weight 720 g
Loading...