RF Elements TP 400 with 24 dBi gain is parabolic antenna with diameter of 40 centimeters, operating in 5 GHz band. RF Ultradish TP400 operates in double 2x2 MIMO polarization. The presented antenna, manufactured by a reputable company RF Elements, is characterized by high resistance to weather conditions and is designed for outdoor installation.
The Ultradish TP series antennas are characterized by side beam attenuation, which reduces interference, so they can be installed in environments with high noise levels. The gain of UltraDish TP is achieved by focusing the signal delivered by the TwistPort waveguide. The TwistPort connector is a fast blocking and lossless waveguide port that connects the radio to the antenna. The TwistPort is a design by RF Elements engineers that sets a new standard for external wireless equipment in terms of performance, scalability, ease of use and ease of deployment.
TwistPort is easy to install, thanks to the integration of mechanical connection and RF connector in the same structure, the connection between the radio and the antenna is extremely simple - "turn and lock" - you can do it with one hand! You no longer need to support the antenna during installation.
The TwistPort connectors are practically lossless, there are no coaxial RF connectors or RF cables that could cause significant signal loss. Compared to commonly used cables and coaxial connectors the signal loss by the TwistPort is practically impossible to measure, therefore the presented device is an excellent technological solution and a step forward towards lossless solutions giving the highest possible antenna gain.
UltraDish TP antennas can be used with any radio with TwistPort interface or with third party solutions or platforms connected via TwistPort adapter.
| Features / filters | |
| Antenna frequency | 5 GHz |
| Antenna type | Directional |
| Energy gain | 21dBi - 30dBi |
| Application | Outdoor |
| Connector type | TwistPort |
| Front-to-back ratio | 35 dB |
| Horizontal beamwidth | 11° |
| IP Rating | IP65 |
| Numbers of pieces in the package | 1-pack |
| Vertical beamwidth | 11° |
| Technical data | |
| Antenna connection | TwistPort connector |
| Antenna type | Parabolic disk |
| Pole mounting diameter | 25-80 mm (recommended diameter as close as possible to 80 mm) |
| Resistance to temperature | -40°C to 60°C (-40°F to 140°F) |
| Wind resistance | 160 km/h |
| Weight | 2.7 kg/6 pounds - single unit (one antenna) |
| Performance | |
| Profit | 24.5 dBi |
| Frequency range | 5180 - 6100 MHz |
| Signal ratio front to back | 35 dB |
| Compatibility | |
| RF Elements | All TwistPort adapters Each SIMPER radio |
Step 1: Bracket installation
First install the bracket on the pole. Two sets of screws for columns of different diameters are included.
The pole bracket is reversible and can be mounted on the left or right side of the antenna.
Step 2: Setting up the antenna
Simply slide the antenna into the holder and adjust the height and azimuth. To complete the installation, tighten the screws.
Only one tool is needed to perform the whole operation.
