Huawei HG8010H | ONT | EchoLife, 1x GPON, 1x RJ45 1000Mb/s

EN
Huawei EchoLife HG8010H ONT terminal working in GPON technology intended for use inside buildings, in optical fibre networks of FTTH type. It is equipped with a gigabit Ethernet port, thanks to which you can use the full potential of a fiber-optic network. It enables comfortable browsing and Internet use, good quality VoIP calls and watching HD movies. EchoLife HG8010H has a very good value for money, making it the ideal solution for FTTH networks as a client terminal.
- port GPON class B+ - Gigabit port Ethernet - plug and play - remote management via OLT - energy savings - tiny
Features / filters | |
Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
PON standard | GPON |
Wireless network standards | None |
USB port | None |
VoIP ports | None |
Technical data | |
Network interface | GPON (SC/APC) |
User interface | Gigabit Ethernet port |
LEDs | POWER / PON / FATE / LAN |
Power supply | 11 - 14 V DC, 0.5 A |
Power supply input | 100 - 240 V AC, 50 - 60 Hz |
Average power consumption | 3 W |
Maximum power consumption | 3,5 W |
Dimensions | 82x90x27 mm |
Weight | 500 g |
Permissible operating temperature | 0 to 40 degrees C |
Permissible air humidity | 5%-95% RH non-condensing |
GPON port | Class B+ Sensitive reception: -27 dBm Wavelength: 1310 nm upstream, 1490 nm downstream Wavelength blocking filter (WBF) Flexible mapping between GEM and TCONT ports Authentication by SN or password, G.984.3 Two-way FEC SR-DBA and NSR-DBA |
Ethernet port | Port based VLAN tags Transparent 1:1 VLAN, N:1 VLAN and VLAN QinQ VLAN MAC address learning Transparent transmission of IPv6 packets in Layer2 layer |
QoS function | Capacity limit per port Priority 802.1p SP / WRR / SP+WWW Broadcast packet limit Flow mapping based on VLAN ID, port ID or 802.1p |
Multicast | IGMP v2 / v3 snooping MLD v1 / v2 snooping Fast leave VLAN tag translation, transparent transmission, removal of multicast packets in downstream Limit of IGMP / MLD protocol packages |
Management | OMCI news Active / passive ONT rogue detection function PPPoE / DHCP imulation testing OMCI / Web UI Software backup and rollback 802.1ag Ethernet OAM Measurement and diagnosis of the optical connection Checking the loopback |
Safeguards | Filtering of MAC addresses |
Saving energy | Energy-saving diodes Reduction of power consumption by unused components COCV4 |
Datasheet Huawei EchoLife HG8010H - ENG | Download |
No, one cable is enough, GPON uses WDM technology, which requires only one cable.
Unfortunately Huawei EchoLife HG8010H does not support WIFI.
Use one of the following methods to reset Huawei HG8010H to factory settings:
Select System Tools > Restore Default Configuration from the main menu on the website and click Restore Default Configuration.
To restart Huawei HG8010H with factory settings, hold down the RESET button for a long time (longer than 10s).
For Huawei HG8010H with GPON upstream transmission: -27 dBm to -8 dBm (class B+).
No. Huawei HG8010H cannot connect to a PON terminal, switch or router in the lower layer.
No. The optical port on the HG8010H is a PON port and the optical port on the optical transceiver is a GE port.
Select Voice > VoIP Basic Configuration from the main menu of the website, and configure the digitmap Match Mode.