Huawei MA5680T | OLT | GPON, 2x X2CS, 2x SCUN 2x PRTE

EN
The Huawei MA5680T is a high-performance OLT terminal designed for GPON networks. The 10U high chassis supports up to 14 GPON service boards, allowing a maximum of 28672 subscribers with 16-port boards or 14336 subscribers with 8-port boards (GPON boards not included). Included with the OLT MA5680T are:
The Huawei MA5680T can also offer high reliability, high clock precision mobile backhaul and high density GE/10GE interfaces for cascading remote access devices. The Huawei MA5680T helps simplify network architecture to enable seamless FTTx network migration and essentially lower TCO.
Features / filters | |
PON standard | GPON |
Technical data | |
Switching capacity | 480Gbit/s (active/stand-by mode) |
Power supply | -48V DC |
Dimensions | 490 mm x 275 mm x 447 mm |
Weight | 33 KG |
Temperature of the working environment | From -25°C to 65°C |
Humidity of the working environment | 5% to 95% relative humidity |
Atmospheric pressure | 61 kPa to 106 kPa |
Height | < 4000 m |
MTBF | ~ 45 years |
Upstream / uplink ports | 2x SFPs on X2CS board |
SCUN | |
Switching capacity | 480 Gb/s in active / standby mode 960 Gbps in load sharing mode |
MAC Address Table | 32768 |
Total capacity | 10 Gbps in active / standby mode 20 Gbps in load sharing mode |
Maximum number of users | 8192 |
Maximum number of multicast users | 8192 |
Maximum number of multicast channels | 4096 |
Maximum number of simultaneous multicast channels | 2000 |
IPv4 routing table | 5120 |
IPv6 routing table | 5120 |
ARP table | 8192 |
Number of ACL rules | 1024 |
Management ports | Out of band Rj45 Console |
Maximum frame size | 2052 bytes Using the jumbo frame function: 9216 |
X2CS | |
Ports | 2 SFP+ slots |
Compatible motherboards | SCUF / SCUN / SCUL / SCUH |
Power consumption | Static: 17.6 W Maximum: 18 W |
Maximum frame size | 2052 bytes Using the jumbo frame function: 9216 |
PRTE | |
Connector | 3V3 |
Voltage | 48 V DC |
Static power consumption | 1,5 W |
The only difference is the capacity, MA5683T max supports 6 service slots, MA5680T max supports 16 service slots.
No, but you can buy a DC converter if you only have an AC power source.
Yes, instead of GICF uplink board, you can buy GICG uplink board, if you use GICF, you can buy electric SFP module, and then you can have 1000 Base-T as uplink.
20KM maximum.