MikroTik hAP ax lite LTE6 kit (L41G-2axD
The MikroTik hAP ax lite LTE6 features 256 MB of RAM and a state-of-the-art dual-core IPQ-5010 ARM processor running at 800 MHz. With RouterOS v7 with a level 4 license, the device offers a wide range of advanced networking features such as secure VPN tunnels, firewalls, bandwidth shaping and user access control.
L41G-2axD
The MikroTik hAP ax lite LTE6 is equipped with a CAT6 LTE modem with band aggregation, enabling speeds of up to 300 Mbps. The built-in CAT6 modem allows the use of multiple bands simultaneously, which is especially beneficial in crowded urban areas and rural areas, where it is noticeable that Internet speeds are doubled thanks to carrier aggregation. The modem supports bands 1, 3, 5, 7, 8, 20, 28, 38, 40, 41.
| MikroTik hAP ax lite LTE6 kit (L41G-2axD | |
| Processor | Dual-Core IPQ-5010 800 MHz |
| Architecture | ARM 64bit (RouterOS 32bit). |
| Number of cores | 2 |
| Clocking | 800 MHz |
| RAM | 256 MB |
| Built-in memory | 128 MB NAND |
| Number of SIM slots | 1 |
| Switch chip | MT7531BE |
| Antenna | Built-in omnidirectional antennas: 2.4 GHz (4.3 dBi) |
| Wireless standards | 2.4 GHz: 802.11 b/g/n/ax |
| Wireless interface model | IPQ-5010 (2.4 GHz) |
| Power supply | 5V 2.4A USB-C (included) |
| Input voltage | min. 5 V DC 2.4 A max. 5 V DC 2.4 A |
| DC socket) | 1x USB type C |
| Maximum power consumption | 12 W |
| Network interface | 4x Gigabit Ethernet 10/100/1000 Mbps ports |
| TAC | 86335904 |
| Dimensions | 124 x 100 x 54 mm |
| Permissible operating temperature | From -40 to 70 degrees C. |
| Operating system | RouterOS v.7 |
| License | Level 4 |
| LTE category | 6 (300Mbit/s Downlink, 50Mbit/s Uplink). |
| LTE modem | FG621-EA |
| LTE FDD Bands | 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) / 8 (900MHz) / 20 (800MHz) / 28 (700MHz). |
| LTE TDD bands | 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) |
| 3G | R8 (42.2Mbps Downlink, 11.2Mbps Uplink) |
| 3G bands | 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz). |
