EN

VOLT SINUS PRO UPS 2500W 24V 20A | Power supply | 2500W

CODE: VOLT SINUS PRO UPS 2500W 24V / EAN: 5903111886394

VOLT SINUS PRO UPS 2500W 24V 20A | Power supply | 2500W

CODE: VOLT SINUS PRO UPS 2500W 24V / EAN: 5903111886394
206,02 GBP without VAT (net)
Out of stock
Battery voltage in UPS: 24V
UPS power (VA): 2500
UPS - charging current: 20A
Show more parameters

About product

SINUS PRO-2500W 24V emergency power supply unit

VOLT SINUS PRO UPS 2500W is a computer emergency power supply from the SINUS PRO series, the device combines high-performance pure sine wave DC/AC converters. In the event of a 230V mains voltage loss or photovoltaic power failure, the device switches to battery mode, which allows for further operation of the system and protection against irretrievable data loss.

upset diagram

The feature that distinguishes sine fault power supplies from cluster simple AC/DC converters is output voltage generation of a pure sine waveform, identical to that in the power network. The device includes DC/AC pure sine wave, UPS emergency switch, mains voltage stabiliser (AVR), battery charger (charger) and the necessary protection for the operation of the device together with the solar controller and photovoltaic. Thanks to the use of a colour display, the device allows you to monitor the most important operating parameters of the system. The power supply is from a series of emergency power supplies type "line-interactive".

SINUS-PRO-UPS

Device characteristics

  • The functions of DC/AC converter, UPS emergency power supply are included in one device and automatic battery charger
  • The toroidal transformer used in the inverter provides high efficiency and low idling current.
  • The device is much more energy efficient than older constructions using transformers with with E-cores
  • A fast 32-bit microprocessor ensures accurate and trouble-free operation
  • Intuitive and easy to use thanks to the colour LED display, which informs about the current status operation of the device (input and output voltage, battery status, charging, etc.)
  • The converter produces pure sine wave voltage at the output, which makes it possible to work with practically any kind of load
  • High-currentcharge of batteries (exact values in the table with technical specifications)
  • Ability to change the charging current with a button and switch off the charger
  • Speed switchover from mains to UPS mode for uninterrupted operation connected devices
  • Intelligent cooling fan control, depending on the actual device temperature and operating status of the inverter
  • Ac (mains) / SOLAR (battery)
priority switch

Display elements and symbols

display

Specification

Features / filters
Battery voltage in UPS 24V
UPS power (VA) 2500
UPS - charging current 20A

Technical data
Rated power (continuous) 1400 W
Overload power (momentary) 2000 VA
Battery voltage / -ów 24 V
Rectifier (charging current) 20 A
PV charging voltage ~ 36V 24 - 50 V
Solar controller None
Automatic mains voltage regulator - AVR 140 - 275 VAC
Idle current (no load) 0,3 A ≤ Idle current ≤ 1,5 A
Permissible supply voltage range Switching to battery power is done when the mains voltage is lower than 160 V (+- 5 V) or higher than 260 V (+- 5 V)
Supply voltage frequency 45 Hz ~ 65 Hz
UPS output voltage frequency 50 Hz (+- 0.5 Hz)
Output voltage range AVR mains voltage regulator: 204 - 240 V, UPS - battery: 230 V (+- 3%)
Overload protection (battery power supply) In the event of an overload of 110 % - 130 %, the power supply is disconnected after 30 seconds. If the overload is more than 130 %, the power supply shall be cut off immediately.
Overload protection (mains supply) The device warns of overload until the fuses are tripped.
Permissible humidity 10 % RH ~ 90 % RH
Permissible operating temperature 0 ~ 40 °C
Dimensions 310 mm x 170 mm x 330 mm
Weight 14 kg

Support

Youtube:

Faq

What are SINUS PRO inverters designed for?

SINUS PRO series converters are designed for office and home applications, they should not be used together with special equipment, the failure of which could cause material damage or threaten life (e.g. industrial and medical equipment).

Can the device be overloaded?

Do not overload the device. Operation under load greater than shift load may damage the inverter.

206,02 GBP without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
Favorite
You are on page for country / region:
 English (EN)
Please select a different country or region to shop in a language that suits you.