TP-Link MC100CM | Media converter | 1x SC/UPC, 1x RJ45 100Mb/s, 1310nm, Multimode

EN
The MC100CM is a 10/100Mbps media converter with a copper cable, enabling the conversion of a 100BASE-FX optical signal to a 100Base-TX signal - and vice versa. The device uses Link Fault Passthrough and Far End Fault functions, which minimize signal losses due to connection errors.
TP-Link MC100CM, according to IEEE 802.3u 10/100Base-TX and 100Base-FX standards, uses multi-mode optical fiber with SC connectors. The MC100CM converter, according to the LX long term optical transmission specification, provides fast wired data transmission speed. The device can send and receive 1310nm wavelength signal.
The converter can work as a stand-alone device or can be mounted in a 19´´TP-LINK cabinet. The TX port is equipped with a Auto MDI/MDI-Xautomatic crossover function and automatic speed negotiation connection in full duplex mode. On the front panel there are LED indicators informing about the operating status of the device. The MC100CM converter, using multi-mode optical fiber, transmits an optical signal over a distance of up to 2 km.
Features / filters | |
Data transmission speed | Fast Ethernet |
Transmission distance | 1-3km |
Type of fiber optic connector | SC |
Certification | FCC, CE |
Connectivity technology | Wired |
Depth | 73 |
Ethernet interface type | Gigabit Ethernet |
Ethernet LAN (RJ-45) ports | 1 |
Ethernet LAN data rates | 1000 |
Fiber optic connector | SC |
Fiber ports quantity | 1 |
Height | 27 |
Internal | No |
LED indicators | Yes |
Maximum data transfer rate | 1000 |
Maximum transfer distance | 2000 |
Networking standards | IEEE 802.3,IEEE 802.3u,IEEE 802.3x |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 40 |
Package depth | 165 |
Package height | 65 |
Package weight | 350 |
Package width | 204 |
Power consumption (max) | 2.5 |
Product colour | Black |
Storage relative humidity (H-H) | 5 - 90 |
Storage temperature (T-T) | -40 - 70 |
Wavelength | 1310 |
Width | 94.5 |
Media converter and module | |
Standards and protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
Basic functions | Full and half duplex mode on FX port Full duplex data flow control (IEEE 802.3x standard) Half duplex (Backpressure) data flow control Increase the range of fiber optic transmission up to 2km Link Fault Passthrough and Far End Fault functions minimize signal losses due to connection errors |
Ports | 1 SC/UPC port 100M 1 port RJ45 100M (Auto MDI/MDIX) |
Wavelength | 1310nm |
Mains cable 10BASE-T | Cat 3, 4 or 5 UTP cable (up to 100m) STP EIA/TIA-568 cable 100Ω (up to 100m) |
100BASE-T network cable | Cat 5, or 5e UTP cable (up to 100m) STP EIA/TIA-568 cable 100Ω (up to 100m) |
100BASE-FX power cable | Multimode optical fibre |
Diode indicators | PWR, FDX/Col, Link/Act, SPD |
Dimensions (S×G×W) | 94.5*73.0*27.0 mm (3.7*2.9*1.1 inches) |
Power supply | External power supply |
Maximum power consumption | 2,5W |
Certificates | FCC, CE, RoHS |
Working environment | Permissible operating temperature: 0℃~40℃ (32℉~104℉) Permissible storage temperature: -40℃~70℃ (-40℉~158℉) Permissible air humidity: 10%~90%, non-condensing Permissible storage humidity: 5%~90%, non-condensing |
Installation guide | Download |