Ubiquiti PBE-M2-400 | CPE | PowerBeam, 2GHz, 1x RJ45 100Mb/s, 18dBi


EN
InnerFeed technology integrates the radio into the antenna radiator, so there is no need to run wires. The PowerBeam ISO is an extremely versatile device that provides high performance and innovative design at low cost.
The PowerBeam device does not require any special tools, only one wrench is needed to mount it on the pole.
The PowerBeam form has the highest gain, and excellent beam targeting provides the best performance in high-noise environments.
Ubiquiti's airMAX technology has proven itself in millions of deployments worldwide, demonstrating exceptional performance in outdoor environments. The TDMA airMAX protocol enables unmatched scalability, high throughput and low latency in unlicensed, multipoint networks.
The PBE-RAD-400 is a radio cover that protects the device from harsh weather conditions. It is available as an optional accessory for the PowerBeam PBE-M2-400
airOS is extremely intuitive software that requires no training to use. Behind the user interface is a powerful firmware architecture that enables efficient, multipoint outdoor networking.
Features / filters | |
LAN standard | Fast Ethernet 10/100Mb/s |
Number of LAN ports | 1x 10/100BaseTX (RJ45) |
Operating frequency | 2.4 GHz |
Antenna gain | 11dBi - 20dBi |
CPU frequency | 560 MHz |
Device type | Client device |
RAM memory | 64MB |
Type of device power supply | Passive PoE |
Basic technical parameters | |
Dimensions | 420 × 420 × 289 mm |
Weight | 1,795 kg |
Power supply | 24 V, 0.5 A PoE |
Maximum electricity consumption | 6 W |
Operating frequency | 2405-2475 MHz |
Reinforcement | 18 dBi |
Network interface | (1) 10/100 Ethernet port |
Processor specifications | Atheros MIPS 74 Kc, 560 MHz |
Memory | 64 MB DDR2, 8 MB Flash |
LEDs | (1) power supply (1) LAN (4) WLAN |
LED signal | Programmable, adaptable to RSSI levels. |
Maximum VSWR | 1.5:1 |
Channel sizes | 5/8/10/20/30/40 MHz |
Polarity | Dual, linear |
Housing | UV stabilized plastic |
Assembly | On a pole (set included) |
Wind load | 278.4 N at 120 km/h |
Wind resistance | 120 km/h |
ESD/EMP protection | Air ± 24 kV, contact ± 24 kV |
Operating temperature | -40°C to 70°C |
Operating humidity | 5 to 95% |
Wireless approvals | FCC, IC, CE |
RoHS compliance | Yes |
Corrosion resistance test | IEC 68-2-11 (ASTM B117), equivalent to: MIL-STD-810 G Method 509.5 |
Vibration test | IEC 68-2-6 |
Temperature shock test | IEC 68-2-14 |
UV test | IEC 68-2-5 at 40°C equivalent: ETS 300 019-1-4 |
Rain test | ETS 300 019-1-4, equivalent to: MIL-STD-810 G method 506.5 |
1. Upewnij się, że system hosta jest podłączony przez Ethernet do PowerBeam.
2. Skonfiguruj adapter Ethernet w systemie hosta za pomocą statycznego adresu IP w podsieci 192.168.1.x.
3. Uruchom przeglądarkę internetową i wpisać w polu adresu https://192.168.1.20
4. Pojawi się ekran logowania. Wprowadź Ubnt w polach nazwa użytkownika i hasło. Wybierz kraj i język. Aby móc korzystać z produktu, musisz wyrazić zgodę na warunki użytkowania. Kliknij przycisk zaloguj.
5. Wybierz rozmiar odbłyśnika anteny PowerBeam Dish
a. Kliknij kartę Wireless.
b. Z listy rozwijanej antena wybierz odpowiednią opcję.
c. Kliknij przycisk zapisz i ok.
The operating frequency is 2.4 GHz.
The operating temperature range is -40°C to 70°C.