Ubiquiti UA-SK-Elevator | Starter kit | UniFi Access, Elevator Hub, G2 Reader, 2x 2-wire PoE extender, 10x Access Card


EN
The Ubiquiti Access Elevator Starter Kit (UA-SK-Elevator) is an innovative kit designed to enhance security and access control in multi-story buildings. Thanks to Ubiquiti Door Access' advanced technologies and connections via Power over Ethernet (PoE), this system allows users to authorize floor selection. The kit is ideal for modern buildings, which require advanced access management.
UA-SK-Elevator provides full support for up to 18 floors and digital inputs that monitor elevator status and emergency situations. With this system, you can be sure that your building's access management will not only be secure, but also efficient. The UA-SK-Elevator starter kit integrates seamlessly with your existing UniFi Access network, allowing centralized management and configuration of all devices in one place.
The Ubiquiti Access Elevator Starter Kit isn't just about technology, it's also about security and convenience. Thanks to the advanced access management system, users can use the elevator seamlessly, confident that only authorized people have access to selected floors. This solution will be ideal for any building configuration, ensuring smooth and safe operation.
Features / filters | |
Access chip/card reader | Yes |
Access code reader | No |
Authentication type | Access chip/card |
Bluetooth | Yes |
Bluetooth version | 4.1 |
Built-in display | No |
Built-in relay | Yes |
Cards capacity | 10 |
DC voltage range | 48 - 50 |
Ethernet LAN (RJ-45) ports | 1 |
Ethernet LAN data rates | 10,100,1000 |
Fingerprint reader | No |
Front camera | No |
Housing material | Polycarbonate (PC) |
Input current | 1.2 |
Input voltage | 50 |
International Protection (IP) code | IP55 |
LED indicators | Status |
Near Field Communication (NFC) | Yes |
Power consumption (max) | 5 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) ports quantity | 1 |
Power over Ethernet (PoE) power per port | 7 |
Product colour | White |
Sustainability certificates | CE, Federal Communications Commission (FCC) |
Sustainability compliance | Yes |
Type | Basic access control reader |
Ubiquiti Access Elevator Hub (UA-Hub-Elevator) | |
Dimensions | 129.3 x 244.7 x 33.6 mm |
Housing material | Polycarbonate |
Assembly material | Polycarbonate |
Weight | 537 g |
Network interface | 4x Gigabit Ethernet 10/100/1000 Base-T ports |
Management interface | 1x Gigabit Ethernet 10/100/1000 Base-T port |
Power method | PoE |
Max power consumption | 7 W (without PoE output) |
PoE input | 1x PoE input , 50 V DC, 1.2 A |
ESD/EMP protection | Air: ±8kV, Contact: ±4kV |
Operating temperature | -10 to 40° C |
Operating humidity | 5 to 95% non-condensing |
Certificates | CE, FCC, IC |
Ubiquiti Access Reader G2 (UA-G2). | |
Dimensions | 93 x 40 x 36.5 mm |
Weight | 82 g |
Housing material | Polycarbonate, glass |
Weather resistance | IP55 |
Network interface | (1) 10/100 MbE RJ45 port |
Connectivity | BLE 4.1 |
Power method | PoE |
Max power consumption | 5 W |
ESD/EMP protection | Air: ±15kV, Contact: ±8kV |
Sensors | Proximity sensor |
Button | (1) Reset to factory settings |
NFC frequency | 13.56 MHz |
NFC reading range | < 30 mm |
NFC standards | ISO 14443A, 14443B, 15693 |
NFC technology | NFC tag 1,2,3,4,5 MIFARE Classic MIFAREPlus MIFARE Ultralight MIFARE DESFire |
Operating temperature | -30 to 45° C (-22 to 113° F). |
Operating humidity | 5 to 90% non-condensing |
Certificates | CE, FCC, IC |
Management application | UniFi Access: Version 1.5.9 and later |
Ubiquiti Access Card (UA-Card). | |
Dimensions | 85.6 x 53.98 x 0.84 mm. |
Weight | 5 g |
Format | ISO 7810 ID-1 |
NFC frequency | 13.56 MHz |
NFC technology | ISO/IEC 14443 Type A MIFARE DESFire UniFi Access Proprietary Security Protocol |