Designed for companies, the UniFi LED is designed to fit seamlessly into existing UniFi networks. The dimmer switch offers the highest light output and lighting quality. The UniFi LED panel can be controlled in three ways: by a UniFi switch, a mobile application or via a browser.
Use the UniFi controller to discover LED panels or dimming switches or check the status of the devices and their statistics. Create and manage groups and create a lighting schedule. As the administrator, you directly control the entire installation. You can specify when each light source should switch on and off.
The application allows you to control and configure it using a mobile device. It has all the functions of a UniFi LED controller such as device detection, group management or schedule configuration. The application can find and configure nearby LED panels and dimmers using Bluetooth.
| Basic technical parameters | |
| Dimensions | 71 × 115 × 25 mm |
| Weight 90 g | (3.17 oz) |
| Management interface | UniFi LED Controller UniFi LED Application |
| Networking Interface | 10/100 Mbps |
| Buttons | Reset |
| Power supply method | 802.3af PoE |
| Power supply unit | Standard 802.3af PoE power supply |
| Voltage range supported | 48 V |
| Maximum power consumption | 5W |
| Operating temperature | 0 to 40° C |
| Certificates | FCC, IC |
After pairing the UniFi dimmer switch with the UniFi LED panel, you can use the dimmer switch:
- to turn the LED panel on or off, touch the touch panel once;
- to change the brightness of the LED panel, press the touch panel and slide your finger up or down;
- dragging up on the touch panel sets the brightness at its maximum level (brightest);
- dragging down on the touch panel sets the brightness at its minimum level (darkest).
The device is powered by 802.3af PoE.
The UniFi LED panel can be controlled in three ways: by a UniFi switch, a mobile application or via a browser.
