EN

ZTE F643 GPON | ONT | 1x GPON, 1x RJ45 1000Mb/s

CODE: ZTE F643

ZTE F643 GPON | ONT | 1x GPON, 1x RJ45 1000Mb/s

CODE: ZTE F643
9,21 GBP without VAT (net)
Out of stock
Show more parameters

About product

ONT F643 GPON

ZXA10 F643 analog of F601 terminal, is a GPON optical network termination for building access network, with one 10/100/1000M Ethernet port for FTTH application, with GPON interface of 2.488Gbit/s and 1.244Gbit/s Downstream and Upstream respectively.

GPON F643 ZTE (1x GE)

High reliability

The high reliability of the ZTE F643 is made possible by a number of hardware and software enhancements, including:

  • It provides full-featured access, broadband availability, high performance, high reliability, ease of use and maintenance, meets ever-changing customer requirements, and provides full investment protection to enhance the performance of the operator's fixed network.
  • It provides various heat dissipation solutions and ensures stable operation.
  • Two software versions are used which support each other to ensure system reliability. In case of failure of the active software without interruption of operation, the backup software is activated.
  • This solution provides reliable protection against lightning discharges in the mains.
GPON F643 ZTE (1x GE)

Excellent compatibility

ZTE ONT devices have been tested for interoperability with GPON OLT devices from 12 manufacturers: Adtran, ALU, Alphion, ECI, Ericsson, Huawei, Iamba, Motorola, Nokia Siemens, Terawave, Fiberhome and Zhone.

GPON F643 ZTE (1x GE)

Hardware architecture

The figure shows the complete hardware architecture of the ZTE F643 chip. It includes an optical module, a GPON MAC module, a switching module, Gigabit PHY circuits, power circuits, and a user interface. It includes a PON uplink optical interface, one Gigabit Ethernet port, reset button, power button, and indicators. The device complies with the ITU-T G.984.X standard specification.

GPON F643 ZTE (1x GE)

The Switching Module supports the following:

  • Supports an array of 256 MAC addresses
  • Supports 8 priority queues on UNI
  • Supports VLAN conversion
  • Speed limitation support at UNI
  • Supports 802.1p priority
  • Supports 10/100/1000 Mbps bandwidth, auto-negotiation duplex and auto MDI/MDI-X state detection

Specification

Basic technical data
Manufacturer ZTE
Model ZXHN F643
GPON interface Optical port: 1 x GPON interface (SC / PC)
Transmission distance 0 ~ 20km
Transmission speed: 2.488Gbit/s downstream; 1.244Gbit/s upstream
User network interface 1 x10 / 100 / 1000Base-T
Half/full duplex; Auto-MDI / MDIX; Auto-negotiation
Optical module Reception: 1480~1500nm
Transmission: 1290~1330nm
Receive sensitivity: -28dBm
Transmission optical power: 0.5~5dBm
Main function Supported services: Internet, IPTV
VLAN: 802.1Q, 802.1n, 802.1p
MAC address table: 256
Multicast: IGMP v1/v2/v3 Snooping
Multicast group: 256
QoS: Classify service flow based on physical port, Ethernet type; limit incoming traffic speed; shape output.
Management: Local site management, OMCI
Physical fitness Power consumption: <3W
Dimensions: 130mm(W) x 40mm(WAT) x103mm(D)
Working temperature: 0 ℃ ~ 40 ℃
Working humidity: 5% ~ 95%
Weight: Approximately 0.2Kg
Power supply: 12VDC
Mounting method: Tabletop / wall mounting

Faq

What does Gigabit Ethernet in ZTE F643 mean?

ZTE F643 terminal is equipped with 4 connectors with support for Gigabit Ethernet. Gigabit Ethernet port allows you to transfer data at a speed of 1 Gbps.

9,21 GBP without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
Favorite
You are on page for country / region:
 English (EN)
Please select a different country or region to shop in a language that suits you.