The FIBARO Single Switch Home Kit is a key element for managing smart of the house and is installed wherever control electrical devices are needed. The module allows to turn on and to turn off any devices, lighting or electricity in sockets. The power metering function provides precise information about energy consumption. Single Switch controls only one electrical device in HomeKit network.
Single Switch Home Kit allows you to manually control from applications, so select and control your device at any time, whoever you are, and if you want control your voice with Apple Siri. The power consumption of connected electrical devices to the modules is constantly monitored. Have full control over the power consumption and plan harmonogram for the operation of home appliances in the FIBAROsystem.
FIBARO Single Switch Home Kit can be linked to the data of other devices in the FIBAROsystem to create automatic actions. Use the modules to control the heating or lighting, and in emergency situations will automatically cut off the current in case of flooding or fire detection. Save energy and use the Single Switch to switch off equipment in standby mode and those you do not need.
| Features / filters | |
| AC input frequency | 50 - 60 |
| AC input voltage | 100 - 240 |
| Certification | RED 2014/53/EU, RoHS 2011/65/EU |
| Connectivity technology | Wireless |
| Control type | Buttons |
| Depth | 42.5 |
| Height | 20.3 |
| Input current | 8 |
| Interface | Wireless |
| Mounting type | Wall |
| Operating frequency | 2400 |
| Operating temperature (T-T) | 0 - 35 |
| Power source | AC |
| Product colour | White |
| Quantity per pack | 1 |
| Wall plate depth | 6 |
| Wall plate width | 5 |
| Width | 38.2 |
| Wireless technology | Bluetooth |
| Technical Specification | |
| Rated current | 8 A - continuous load |
| Supported load types | Resistance Żarowe |
| Power supply | 100-240 V AC, 50/60 Hz |
| Operating temperature | 0° to 35°C (32° to -95°F) |
| For mounting in boxes | Ø ≥ 50 mm, depth ≥ 60 mm |
| Overcurrent protection | External 10 A circuit breaker required |
| Radio protocol | Bluetooth® with low energy |
| Compliance with EU directives | RED 2014/53/EU RoHS 2011/65/EU |
| Radio frequency | 2.4 GHz |
| Radio signal strength | EIRP up to 10 dBm |
| Radio transmitter power | Up to 10 dBm (EIRP) |
| Dimensions (L x W x H) | 42.5 x 38 x 20.4 mm |
The Single Switch Home Kit works with Bluetooth HomeKit technology, works with Apple devices, enables voice control with Apple Siri, has a sharing home function and realizes simple scenes.
No, you don't need a wall switch. You can control the connected light source through FIBARO Home Center and Apple Siri. You can also configure the FIBARO Motion Sensor to switch on the lighting in case of motion detection.
To control the Single Switch Home Kit, iOS 10 or later is recommended, or an Apple TV with tvOS 10 or later.
The FIBARO Single Switch Home Kit cannot directly control the output. The module simply closes the electrical circuit, so a device connected to this electrical network switches on (or switches off the relay interruption).
No, the FIBARO Single Switch Home Kit cannot control any non-peripheral outputs.
