Fibaro FGRGBWM-441 | RGBW Controller | for LED light sources
CODE: FGRGBWM-441 / EAN: 5902020528159
Contact
Account
Favorite
Cart
FIBARO RGBW Controller - this inconspicuous looking module will allow you to match the colors of the lights in intelligent home (smart home). You can control the lighting with application on your phone or with voice command, adjusting it according to your activities or moments of relaxation, according to your needs and mood. Create your own FIBAROapplication with your own color palette, which will motivate you to act while working and relax during moments of rest.
FIBARO RGBW Controller is a universal, compatible with Z-Wave controller controlling LED, RGB, RGBW, Halogen lights and fans. Connecting the module to the FIBARO system enables synchronization with the alarm system, thanks to which, when a threat, e.g. fire or burglary, occurs, you will be notified by means of the previously selected light illumination.
| Technical Specification | |
| Power supply | 12/24 V DC |
| PWM output frequency | 244 Hz |
| Rated output power | Total 12 A (sum of all connected output channels) 6 A for a single output channel |
| Electricity consumption | 0.3 W |
| Radio signal strength | 1 mW |
| Radio protocol | Z-Wave |
| Maximum load | At 12 V - 144 W total With 24 V - 288 W total |
| Radio frequency | 868.4 MHz EU 908.4 MHz US 921.4 MHz ANZ 869.0 MHz RU |
| Dimensions (L x W x H) | 42 x 37 x 17 mm |
| For mounting in boxes | Ø ≥ 50 mm |
| Reach | Up to 50 m outside Up to 30 m inside (depending on the terrain and structure of the building) |
| Operating temperature | 0°C to 40°C |
| Compliance with the EU Directive | RoHS 2011/65/EU EMC 2004/108/EC R&TTE 1999/5/EC |
| Radio transmitter power | up to -1 dBm (EIRP) |
The total limit of the RGBW controller is 144 W at 12 V DC or 288 W at 24 V DC. The maximum length depends on how many watts per meter the LED strip requires.
Yes, because they act as an entrance. Make sure the light/button switch is connected to the GND channel.
No. If you sum up the colours red, green and blue, you get a white light. However, an additional white channel gives you a wider range of colour options.
Yes. Each RGBW channel is separated, so any light source can be connected to each channel. The only requirement is to work at the same voltage, e.g. 12 V.
No. The unit operates at 12-24 V DC and requires an external transformer. Connecting it directly to the mains will cause a catastrophic failure.
