RF elements® Array Sector antennas are optimized for high performance in unlicensed frequency bands. They offer superior RF performance, co-location capability, easy installation and cost efficiency.
The side lobes of Array Sector antennas are attenuated using BackShield™ technology, our patented frequency-selective azimuthal side lobe and back lobe attenuation surface integrated into the antenna body.
The Array Sector 2-17 antenna's gain is stable in both horizontal and vertical polarizations, offering reliable performance no matter which channel you use. The antenna is lightweight and made of high-quality materials that won't corrode.
| Features / filters | |
| Antenna frequency | 2.4 GHz |
| Energy gain | 10dBi - 20dBi |
| Physical Data | |
| Antenna connection | 2x RP-SMA on integrated semi-flexible pigtails |
| Antenna type | Patch Array Sector |
| Materials | UV-resistant ABS plastic, aluminum alloy, stainless steel |
| Environmental class | IP55 |
| Temperature | -35°C to 60°C (-31°F to 140°F) |
| Wind resistance | 160 km/h (100 mi/h) |
| Wind load | Front/side at 160 km/h |
| Electric tilt | 0° |
| Pole mounting diameter | 40-80 mm |
| It is recommended to install as close as possible to | 80 mm |
| Weight | 3.9 kg |
| Retail packaging of a single unit | 834 x 167 x 130 mm |
| Technical data | |
| Frequency range | 2400 - 2484 MHz |
| Reinforcement | 17 dBi |
| Polarity | Double linear H V |
| Beam width in azimuth | -3 dB H 71° / V 78° |
| Façade beam width | -3 dB H 8° / V 8° |
| Azimuthal beam width | -6 dB H 10° / V 10° |
| Front to back ratio | (min) 21 dB |
| Beam efficiency | 87 % |
| Cross insulation | Pol H 30 dB / V 30 dB |
| Impedance | 50 Ohms |
| VSWR max. | 1,6 |
| VSWR | Typical 1.4 |
| Isolation between ports | 30 dB |
