EN
Sixteen gigabit RJ45 ports offer connectivity - with PoE input on port 1 and PoE output on port 16. Two SFP ports guarantee fiber connectivity.
Affordable high performance switch with a fanless design, perfect for large scale WISP solutions.
The EdgeSwitch 18X switch can be wall or rack mounted.
The new interface is easy to learn and allows you to monitor and configure functions through an intuitive graphical user panel.
The EdgeSwitch 18X is operated and managed by UNMS™, a comprehensive controller with an intuitive user interface. A single control plane manages registered EdgeMAX® devices at multiple locations.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 16x [10/100/1000M (RJ45)] , 2x SFP (1,25G), |
Basic switching RJ-45 Ethernet ports quantity | 16 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Certification | CE, FCC, IC |
DC input voltage | 24 |
Depth | 160 |
Forwarding rate | 26.78 |
Height | 43.7 |
Housing material | Metal |
Input current | 1 |
Installed SFP modules quantity | 2 |
Jumbo frames | 10000 |
Jumbo frames support | Yes |
LED indicators | LAN, System |
Management | CLI - Command Line Interface, By web browser, |
Number of VLANs | 4000 |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | -10 - 50 |
Power consumption (max) | 14 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) power per port | 15 |
Power over Ethernet (PoE) type supported | Passive PoE |
Power over Ethernet (PoE) voltage | 24 |
Power supply included | Yes |
Product colour | Black |
Quality of Service (QoS) support | Yes |
Rack mounting | Yes |
Rack rails | Yes |
Switch layer | L2 |
Switch type | Managed |
Switching capacity | 36 |
Switching layer | 2 |
Type of case | Rack (1U), Desktop, |
VLAN support | Yes |
Web-based management | Yes |
Weight | 1.15 |
Width | 299.8 |
Basic technical parameters | |
Dimensions | 299.8 x 160 x 43.7 mm (11.8 x 6.3 x 1.7") |
Weight | Without attachment: 1.15 kg (2.54 lb) With mount: 1.43 kg (3.15 lb) |
Total transmission rate without line blockage | 18 Gbps |
Switching capacity | 36 Gbps |
Transmission rate | 26.78 Mpps |
Maximum power consumption (excluding PoE output) | 14W |
Power supply method | 24VDC, 1A or 24V passive PoE |
Supported voltage range | 9 -30VDC |
Power supply | 24VDC, 1A power supply (included) or 24V passive PoE |
Network interfaces | (16) 10/100/1000 Mbps RJ45 ports (2) 1 Gbps SFP |
Management interface | Ethernet In-Band |
Certificates | CE, FCC, IC |
ESD/EMP protection | Air: ± 16 kV, contact: ± 8 kV |
Operating temperature | -10 to 50°C |
Operating humidity | 5 to 95% |
Shock and vibration | Standard ETSI300-019-1.4 |
PoE (port 16) | |
PoE interface | 24VDC passive PoE (pins 4, 5+; 7, 8-) |
Maximum passive PoE power per port | 15W |
24 V Passive PoE voltage range | 24 V |
Software | |
Mode | Ethernet Layer 2 Switch |
VLAN | 4K VLANs |
QoS | (16) Priority queues per user port and traffic classification |
Jumbo frame | 10 KB |
PoE | Passive PoE on/off |
Other | TFTP Recovery |
Specific features of Ubiquiti | Ubiquiti Discovery |
Minimum software requirements | Web browser (Chrome recommended) |
Datasheet | Download |
1. Remove the protective cap covering the SFP port.
2. Connect a compatible fiber optic module to the SFP port.
3. connect the fiber optic cable to the fiber optic module. Then connect the other end of the cable to another fiber optic device.
24VDC, 1A power supply (included) or
24V passive PoE
Working temperature: from -10 to 50°C
Management: CLI - Command Line Interface, via web browser.