EN
NanoBeam® can fixed to various surfaces, including columns or walls, and offers the freedom of three-axis positioning. No screws are required for pole mounting and only one wall screw is required for wall mounting.
NanoBeam® has high gain due to its size. The excellent directionality of the NanoBeam provides best performance in high noise environments.
Ubiquiti's airMAX® technology has been proven in millions of applications worldwide, demonstrating exceptional performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.
Ubiquiti combined radio and antenna to create a more efficient and compact CPE. Delivering increased performance with faster processor and innovation mechanical design at low cost and the NanoBeam is extremely versatile and cost-effective to implement.
airOS is designed to require no training for operation. Behind the user interface there is a powerful software architecture that enables high performance of a multi-point external network.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
Operating frequency | 5 GHz |
Antenna gain | 11dBi - 20dBi |
CPU frequency | 560 MHz |
Device type | Client device |
MIMO Type | 2x2 |
RAM memory | 64MB |
Type of device power supply | Passive PoE |
Basic technical parameters | |
Dimensions (with mounting) | 189 × 189 × 189 × 125 mm |
Weight (with assembly) | 530 g |
Frequency of operation | 5170 - 5875 MHz |
Gain | 19 dBi |
Network interface | (1) 10/100 Ethernet port |
Case | UV-stabilised plastic |
Maximum Power Consumption | 8W |
Power supply | 24 V, 0.5 A PoE power supply (included) |
Power supply method | Passive PoE (pairs 4, 5+; 7, 8 return) |
Wind load | 45,4 N @ 200 km/h |
Wind survivability | 200 km/h |
Certificates | CE, FCC, IC |
Installation | Pole mounting (supplied) |
Operating temperature | -40 to 70° C |
Operatinghumidity | 5 to 95% |
Salt mist test | 68-2-11 (ASTHMA B117), Equivalent: MIL-STD-810 G Method 509.5 |
Vibration test | IEC 68-2-6 |
Temperature shock test | IEC 68-2-14 |
UV test | IEC 68-2-5 at 40° C Equivalent: ETS 300 019-1-4 |
Wind-driven rain test | ETS 300 019-1-4 Equivalent: MIL-STD-810 G Method 506.5 |
1. Remove the port cover by pressing down the center of the
cover and sliding the cover out.
2. Connect an Ethernet cable to the Ethernet port.
3. Replace the port cover.
4. Connect the other end of the Ethernet cable from the NanoBeam to the Ethernet port labeled POE on the PoE Adapter.
5. Connect an Ethernet cable from your LAN or computer to the Ethernet port labeled LAN on the PoE Adapter.
6. Connect the Power Cord to the power port on the
PoE Adapter. Connect the other end of the Power Cord
to a power outlet.
Passive PoE (pairs 4, 5+; 7, 8 return)
Operating temperature: -40 to 70° C