Ubiquiti NS-5ACL | CPE | NanoStation 5AC loco, 5GHz, 1x RJ45 1000Mb/s, 13dBi
CODE: NS-5ACL / EAN: 810354026331
Contact
Account
Favorite
Cart
NanoStation AC loco is a compact, high-performance CPE equipped with airMAX AC technology and a dedicated Wi-Fi radio for management.
Each NanoStation AC loco connects a separate Wi-Fi radio for quick and easy setup with a mobile device.
NanoStation AC loco provides enhanced protection against electrostatic discharge events.
airOS 8 offers advanced features including airMAX ac protocol support, real-time RF analysis and a completely new design for increased usability.
airMAX ac supports high data rates that require dense modulation. 256QAM gives a significant increase over 64QAM which is used in airMAX. Thanks to the patented airMAX ac technology, airMAX ac products support up to 450+ Mbps actual TCP/IP throughput.
airView allows the identification of interference signatures and planning the network to minimize interference.
| Features / filters | |
| 5 GHz | Yes |
| AC input voltage | 24 |
| Antenna gain level (max) | 13 |
| Built-in processor | Yes |
| Certification | CE, FCC, IC |
| Depth | 77.5 |
| Ethernet LAN (RJ-45) ports | 1 |
| Ethernet LAN data rates | 10,100,1000 |
| Height | 59.1 |
| Input current | 0.5 |
| Internal | No |
| Internal memory | 64 |
| LED indicators | Network, Power, Signal strength |
| Maximum data transfer rate | 1000 |
| Maximum outdoor range | 10000 |
| Modulation | 16-QAM,64-QAM,256-QAM,BPSK,QPSK |
| Operating relative humidity (H-H) | 5 - 95 |
| Operating system installed | AirOS |
| Operating temperature (T-T) | -40 - 70 |
| Placement | Ceiling |
| Product colour | White |
| Throughput data rate | 450 |
| Weight | 180 |
| Width | 179 |
| Basic technical parameters | |
| Dimensions | 179 × 77,5 × 59,1 mm |
| Weight | 180 g |
| Power supply | 24 V, 0.3A Gigabit PoE |
| Maximum electricity consumption | 7W |
| Power supply method | Passive PoE 2 pairs (pairs 4, 5+; 7, 8 back) |
| Strengthening | 13 dBi |
| Network interface | 10/100/1000 Mbps Ethernet port |
| Channel bandwidth | 10/20/30/40/50/60/80 MHz |
| CPU specification | Atheros MIPS 74Kc, 560 MHz |
| Memory | 64 MB DDR2 |
| Cross-pol isolation | 20 dB |
| Maximum VSWR | 1.8:1 |
| Beamwidth | 45° (H-pol) / 45° (V-pol) / 45° (height) |
| Polarisation | Dual linear |
| Case | UV-stabilised plastic |
| LEDs | (1) Power |
| Mounting | Pole-mount kit (Included) |
| Operating temperature | -40 to 70° C |
| Operating humidity | 5 to 95% |
| RoHS compliance | Yes |
| ESD/EMP protection | ±24kV Contact/Air |
| Shocks and vibrations | ETSI300-019-1.4 |
| Certificates | CE, FCC, IC |
| Operating frequency (MHz) | 5150 - 5875 |
| Management Radio (MHz) | 2412 - 2472 |
1. Press the Port Cover Release Button located on the back of
the NanoStation and slide the cover off. 
2. Connect an Ethernet cable to the Main port.
3. Replace the port cover.
Operating temperature: -40 to 70° C
Passive PoE
