EN
The device does not require any special tools for mounting.
Ubiquiti's airMAX technology has been proven in millions of applications worldwide, demonstrating exceptional performance in outdoor environments. The TDMA airMAX protocol provides exceptional scalability, high throughput and low latency in unlicensed, multipoint networks.
Ubiquiti's versatile airOS technology allows for a efficient, multi-point external network. airOS provides features such as wireless network settings, bridge or routing configuration and network management services.
Ubiquiti NanoStationLoco 5ac has a PoE-powered LAN port. The new design based on the existing concept, the PoE power supply, a very favorable isolation factor between the polarizations and 15kV surge protection for the radio track are features that give it an advantage over other devices of this type. The product can work in modes: Station, StatiosWDS, Access Point.
airView software provides spectrum analysis in different views: waterfall, waveform and real time view. This allows you to identify noise and plan the network to minimize it.
Features / filters | |
5 GHz | Yes |
AC input voltage | 24 |
Antenna gain | 11dBi - 20dBi |
Antenna gain level (max) | 13 |
Built-in processor | Yes |
Certification | CE, FCC, IC |
Depth | 77.5 |
Device type | Client device |
Ethernet LAN (RJ-45) ports | 1 |
Ethernet LAN data rates | 10,100,1000 |
Height | 59.1 |
Input current | 0.5 |
Internal | No |
Internal memory | 64 |
LED indicators | Network, Power, Signal strength |
Maximum data transfer rate | 1000 |
Maximum outdoor range | 10000 |
Modulation | 16-QAM,64-QAM,256-QAM,BPSK,QPSK |
Numbers of pieces in the package | 5-pack |
Operating relative humidity (H-H) | 5 - 95 |
Operating system installed | AirOS |
Operating temperature (T-T) | -40 - 70 |
Placement | Ceiling |
Product colour | White |
RAM memory | 64MB |
Throughput data rate | 450 |
Type of device power supply | Passive PoE |
Weight | 180 |
Width | 179 |
Working temperature | -40°C to +70°C |
Basic technical parameters | |
Dimensions | 179 x 77.5 x 59.1 mm |
Weight | 180 g |
Processor | MIPS 74K |
Memory | DDR2 64 MB |
Antenna gain | 13 dBi |
Network interface | 10/100/1000 Mbps Ethernet port |
Power supply method | Passive PoE (pairs 4, 5+; 7, 8 return) |
Power supply | 24 V, 0.3A Gigabit PoE |
Maximum electricity consumption | 7W |
Range of supported voltage | 24 V ±10%. |
ESD/EMP protection | ±24kV contact / air |
Operating temperature | -40 to 70° C |
Operating humidity | 5 to 95% |
Certificates | CE, FCC, IC |
Operating frequency (MHz) | 5150 - 5875 |
Management frequency (MHz) | 2412 - 2472 |
1. Connect the Ethernet cable from the device to the PoE Adapter.
2. Connect the Ethernet cable from the LAN network to the LAN port on the PoE adapter.
3. Connect the power cord to the adapter and a power outlet.
Passive PoE (pairs 4, 5+; 7, 8 return)
Operating temperature: -40 to 70° C