EN
NanoStation M has a CPE design that has expanded the global wireless internet industry.
NanoStation®M requires no special tools, just one screw on the pole.
NanoStation M can be used for point-to-point (PtP) connection or as airMAX CPE.
With a software-supported PoE output, a second Ethernet port can power an external device, such as a PoE external camera, for trouble-free video recording.
Ubiquiti's comprehensive airOS software technology allows for a efficient, multi-point external network. airOS provides features such as wireless network settings, bridge or routing configuration and system management services.
Ubiquiti's airMAX technology has been proven in millions of products worldwide, demonstrating exceptional performance in outdoor conditions. The TDMA airMAX protocol enables unprecedented scalability, high speed and low latency in unlicensed, multipoint networks.
Use the NanoStation Mount to quickly mount NanoStationM on a window or wall. The 180° vertical or horizontal adjustment allows for free positioning.
Features / filters | |
LAN standard | Fast Ethernet 10/100Mb/s |
Number of LAN ports | 2x 10/100BaseTX (RJ45) |
Operating frequency | 3 GHz |
Antenna gain | 11dBi - 20dBi |
CPU frequency | 400MHz |
Device type | Client device |
RAM memory | 32MB |
Type of device power supply | Passive PoE |
Basic technical parameters | |
Dimensions | 294 × 31 × 80 mm |
Weight | 500 g |
Power supply (PoE) | 24 V, 0.5 A |
Maximum power consumption | 8W |
Power supply method | Passive PoE (pairs 4, 5+; 7, 8 return) |
Frequency of operation | 3400-3700 MHz |
Strengthening | 12.2-13.7 dBi |
Network interface | (2) 10/100 Ethernet ports |
Processor | Atheros MIPS 24Kc, 400 MHz |
Memory | 32 MB SDRAM, 8 MB Flash |
Frequency | 3 GHz |
Cross-insulation | 28 dB Minimum |
Maximum VSWR | 1.4:1 |
Beam width | 60° (H-pol) / 60° (V-pol) / 20° (height) |
Polarisation | Dual line |
Case | UV-stabilised plastic |
Installation | On the post (included) |
Operating temperature | -30 to 75° C |
Working humidity | 5 to 95% |
RoHS compliance | Yes |
Shocks and vibrations | ETSI300-019-1.4 |
1. Podłącz kabel Ethernet z urządzenia do portu PoE adaptera
2. Podłącz kabel Ethernet z sieci LAN do partu LAN adaptera PoE.
3. Podłącz przewód zasilający do portu zasilania.