EN
airMAX® ac products offer improved latency, noise immunity, scalability and significantly improved performance.
The integrated separator design improves RF isolation to filter out spatial interference and the metal interior of the back enclosure enhances radio frequency shielding.
The integrated isolator design spatially filters out interference, so that PowerBeam ac ISO provides better signal quality. Both graphs near the field are displayed in watts and use a linear scale.
Ubiquiti's airMAX® software with a custom chipset significantly improves TDMA delay and network scalability. The custom processor provides hardware acceleration capabilities for the airMAX schedule to support the high data rate and dense modulation used in airMAX ac technology.
Ubiquiti's airMAX® technology has been proven in millions of devices worldwide, demonstrating exceptional performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed multipoint networks.
airView allows to identify noise signatures and plan the network in such a way that minimize interference. airView performs the following functions:
airMAX ac supports high data transfer rates, whose capacity is as much as 450+ Mbps, require dense modulation: 256QAM has a significant increase over 64QAM, which is used in airMAX.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
Operating frequency | 5 GHz |
AC input voltage | 24 |
Antenna gain | 21dBi - 30dBi |
Antenna gain level (max) | 27 |
Certification | FCC, IC, CE, RoHS |
Connectivity technology | Wired |
CPU frequency | 720 MHz |
Device type | Client device |
Dimensions (WxDxH) | 564 x 308 x 564 |
Ethernet LAN | Yes |
Ethernet LAN (RJ-45) ports | 1 |
Ethernet LAN data rates | 10,100,1000 |
Flash memory | 16 |
Frequency band | 5.150 - 5.875 |
LED indicators | LAN, Power, WLAN |
Modulation | 16-QAM,64-QAM,256-QAM,BPSK,QPSK |
Networking standards | IEEE 802.11ac |
Operating relative humidity (H-H) | 5 - 95 |
Operating temperature (T-T) | -40 - 70, -40 - 158, |
Power consumption (24V) | 500 |
Power consumption (typical) | 8 |
Power LED | Yes |
Power over Ethernet (PoE) | Yes |
Power source type | PoE |
Processor family | Atheros |
Processor frequency | 720 |
Processor model | MIPS 74Kc |
Product colour | White |
Product type | Network bridge |
RAM capacity | 128 |
RAM memory | 128MB |
Signal strength | 22 |
Type of device power supply | Passive PoE |
Weight | 5.2 |
Basic technical parameters | |
Dimensions | 564 × 564 × 308 mm |
Weight | 5.2 kg |
Power supply | 24 V, 0.5A Gigabit PoE |
Power supply | Passive PoE (Pairs 4, 5+; 7, 8 Back) |
Voltage range | 20-26VDC |
Maximum power consumption | 8W |
Frequency of operation | 5150 - 5875 MHz |
Strengthening | 27 dBi |
Network interface | (1) 10/100/1000 Ethernet port |
CPU specification | Atheros MIPS 74Kc, 720 MHz |
Memory RAM | 128 MB DDR2, 16 MB Flash |
LED indicators | (1) Power (1) LAN (4) WLAN |
LED signal strength | Adjustable at software level to match RSSI levels |
Supported bandwidths | PtP mode 10/20/30/40/50/60/80 MHz PtMP mode 10/20/30/40 MHz |
Maximum VSWR | 1.5:1 |
Built-in downward tilt mechanism | ± 20° |
Polarisation | Two-line polarization |
Case | External UV-resistant plastic casing |
Installation | Columnal (parts included) |
Wind resistance | 984 N @ 200 km/h |
Maximum wind resistance | 200 km/h |
ESD/EMP protection | _± 24 kV, Contact ± 24 kV |
Operating temperature | -40 to 70° C |
Humidity during operation | 5 to 95% |
Certificates | FCC, IC, CE |
RoHS compliance | Yes |
Corrosion resistance test | 68-2-11 (ASTHMA B117), Equivalent: MIL-STD-810 G Method 509.5 |
Vibration test | IEC 68-2-6 |
Temperature test | IEC 68-2-14 |
UV test | IEC 68-2-5 in 40° C (104° F) The equivalent: ETS 300 019-1-4 |
Cloud-busting test | ETS 300 019-1-4 Equivalent: MIL-STD-810 G Method 506.5 |
1. Podłącz kabel Ethernet z portu Ethernet urządzenia do portu POE adaptera.
2. Podłącz kabel Ethernet z sieci LAN do portu LAN adaptera.
3. Podłącz przewód zasilający do portu zasilania. Podłącz drugi koniec przewodu zasilającego do gniazdka sieciowego.
Operating frequency: 5 GHz
Operating temperature -40 to 70° C