Ubiquiti ULED-AT | LED Panel | UniFi LED, 2400 lm, 60x60cm
CODE: ULED-AT / EAN: 817882023511
EN
UniFi LED Panel is an energy-efficient ceiling light powered by native 802.3at PoE+ that provides adjustable, efficient interior lighting. The long-life LEDs run for more than 50,000+ hours. The device is practically maintenance-free and can be easily managed by a UniFi LED controller and UniFi LED application by phone.
Remote control: with UniFi LED controller, UniFi LED application or UniFi dimmer.
Features / filters | |
Color Rendering Index (CRI) | 80 |
Colour temperature (min) | 4000 |
Depth | 602 |
Dimmable | Yes |
Height | 56.7 |
Light colour | Natural white |
Light colour type | White |
Luminous efficacy | 100 |
Mounting surface type | Ceiling |
Operating temperature (T-T) | 0 - 40 |
Power consumption (max) | 5 |
Product colour | White |
Shape | Rectangular |
Weight | 4.5 |
Width | 602 |
Basic technical parameters | |
Dimensions | 602 × 602 × 602 × 56,7 mm |
Weight | 4.5 kg |
Network interface | (1) 10/100 Mbps Ethernet port |
Communication | Bluetooth 4.1 |
Buttons | Resetting |
LEDs | Status |
Power supply method | 802.3at PoE+ |
Range of supported voltages | Standard PoE+ 42.5-57.0 V |
Maximum power consumption | 25,5W |
Installation | T-Grid |
Operating temperature | 0 to 40° C |
Certificates | FCC, IC |
Lighting | |
Pre-supplied luminance | 2300 lm |
Effectiveness | 100 lm/W |
CCT | 4,000 K |
L80 | > 50,000 hours. |
CRI | > 80 |
Angle of the beam | 114° |
Brightness adjustment | 10-100% dimming |
The surroundings | Dry location indoors |
Installation:
1. Connect one end of the Ethernet cable to the PoE+ port - located on the back of the UniFi LED panel.
2. Connect the other end of the cable to the 802.3at connector, which should provide 25W PoE+.
3. Lift the panel and place it in the ceiling grid hole.
.