The UniFi® NVR has UniFi Video software pre-installed for quick and easy deployment. It manages UniFi video cameras and records video up to 20 cameras according to the settings.
The UniFi® NVR comes with an installation wizard for easy setup. The factory installed UniFi Video software automatically detects cameras for quick deployment.
UniFi® Video software includes an advanced user interface and a comprehensive set of features, including custom motion detection zones, event recordings, e-mail alerts, live monitoring, disk management and analytical functions.
UniFi Video software offers many options and settings tailored to what the cameras are recording.
Upload a map of your location or use Google Maps to show the areas where the cameras are located.
| Features / filters | |
| Resolution | HD 720p |
| Built-in display | No |
| Built-in processor | Yes |
| Certification | CE, FCC, IC |
| Depth | 135 |
| Ethernet LAN (RJ-45) ports | 1 |
| HDD capacity | 2000 |
| Height | 25 |
| Internal memory | 4096 |
| Maximum storage capacity | 2 |
| Number of HDDs installed | 1 |
| Power consumption (typical) | 65 |
| Power over Ethernet (PoE) | No |
| Product colour | Black |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 2 |
| Video formats supported | H.264,MP4 |
| Weight | 483 |
| Width | 190 |
| Basic technical parameters | |
| Dimensions | 135 × 190 × 25 mm (5,31 × 7,48 × 0,98") |
| Weight | 483 g (17 ounces) |
| Processor | Intel J1800 |
| Memory | 4 GB |
| Hard disk capacity | 2 TB |
| Network interface | (1) 10/100/1000 Ethernet port |
| Power supply | 65W, 19 V, 3,42A |
| Certificates | FCC, CE, IC |
| UniFi Video software | |
| Interfaces | Browser, iOS and Android |
| Installation of the system | Plug-and-Play Automatic camera detection |
| Camera operation | Recommended maximum 20 UniFi video cameras |
| Data format | MP4 (H.264/AAC) |
| Schedule | day/time/camera scheduled video/motion recording detection alerts/alerts to e-mail |
| Camera view | Many live cameras, grid view Video playback Full screen Window |
Connect the Ethernet cable from the UniFi Video NVR directly to your computer.
2. Press the power button on the UniFi Video NVR and wait about one minute until it fully starts.
3. Configure the Ethernet card on your computer with the
static IP address in subnet 192.168.1.x.
4. Start a web browser and enter: http:// 192.168.1.30 in the address field.
5. The UniFi Video configuration portal will appear in a new browser window.
