Yeastar TA2400 | VoIP Gateway | 24x FXS ports
CODE: TA2400
Contact
Account
Favorite
Cart
Yeastar TA2400 is an enterprise FXS gateway designed to work with any IP-PBX and VoIP operator supporting SIP or IAX2 protocols. This model has 24 FXS ports, which are also designed as a single Telco socket. This allows up to 24 conventional handsets, DECT phones or fax machines to be connected to the gateway.
For local network operation, the Yeastar TA2400 has one Fast Ethernet network port. It can be easily mounted in a standard 19'' rack or cabinet, and is configured through an intuitive web-based interface. The gateway is an excellent alternative to purchasing expensive IP phones - the cost savings far outweigh the slightly lower level of convenience and functionality of traditional phones.
| Basic general data | |
| Manufacturer | Yeastar |
| Model | TA2400 |
| Type | VoIP gateway |
| Interfaces | |
| Ports | 24 FXS ports |
| Telephone interfaces | RJ11 and RJ21 50-pin Telco Connectors |
| Network interfaces | 1 x 10/100BASE-T Ethernet |
| Indicators | Port status and activity LEDs |
| Media processing | |
| Protocol | SIP (RFC3261), IAX2 |
| Transport | UDP, TCP, TLS, SRTP |
| Codec | G.711 (alaw/ulaw), G.722, G.723, G.726, G.729A/B, GSM, ADPCM |
| Voice capabilities | ITU-T G.168 LEC Echo cancellation, dynamic jitter buffer, VAD, CNG, PLC |
| DTMF mode | RFC2833, SIP Info, In-band |
| Fax | T.38 and Pass-through |
| QoS | DiffServ, ToS, 802.1 P/Q VLAN tagging |
| Telephony functions | |
| Call handling | 3-way conference, attended and blind transfer, call transfer, caller ID display, call waiting, CDR, direct call to caller ID, distinctive ringing, do not disturb, flexible dial plan, hunt groups, hotline, MWI, speed dial |
| Security / IP services | |
| Firewall | Built-in Firewall, IP blacklist, attack warning |
| Network | DHCP, DDNS, OpenVPN, Static Routing, VLAN |
| Nat Traversal | Static NAT, STUN |
| Network protocol | FTP, TFTP, HTTP, HTTPS, SSH |
| Management | |
| Protocols | SNMP, RADIUS, TR-069 |
| Provisioning | Web GUI, Auto Provisioning, Backup and Restore, Firmware Upgrade by HTTP/TFTP |
| Configuration | Remote Management, Packet Capture, System Logs, Voice Menu for FXS Gateways Basic Configuration, API |
| Connectivity | |
| Signalling | FXS Loop Start, FXS Kewl Start |
| Caller identification | BELL202, ETSI (V23), NTT (V23-Japan) and DTMF-based CID |
| Disconnection methods | Busy signal, polarity reversal |
| Short and long distances | 3REN, up to 1.5 km on 24 AWG wire |
| Physical properties | |
| Power supply | AC 100-240V (12V 5A) |
| Dimensions | 440 mm × 250 mm × 44 mm |
| Operating temperature | 0°C to 45°C 32°F to 113°F |
| Storage temperature | -20°C to 65°C -4°F to 149°F |
| Humidity | 10-90% non-condensing |
| Mounting | Desk mounting Rack-mounting |
| Compatibility | |
| Softswitch and IP-PBX | Works with a wide range of IPPBX and softswitches BroadSoft certified |
