Extralink SFP 1.25G | SFP to RJ45 Module | 1,25Gbps, 100/1000BASE-T, 100m

EN
Extralink 's 1000 Mbps SFP RJ45 module is a high-performance and cost-effective device that complies with Gigabit Ethernet and 1000-BASE-T standards as defined through IEEE 802. 3-2002 and IEEE 802.3ab standards. The SFP RJ45 insert supports data rates of 1000 Mbps at distances up to 100 meters for Category 5 Ethernet cable and 1000 Mbps full duplex data links with 5-level pulse amplitude modulation (PAM). All four pairs in the cable are used at a symbolic rate of 250 Mbps per pair. The Extralink SFP RJ45 provides standard SFP MSA-compliant serial ID information, which can be accessed with an A0h address via a 2-wire CMOS EEPROM serial protocol. The physical IC can also be accessed via the 2-wire serial bus at address A0h. The SFP RJ45 module is compatible with most gigabit SFP ports found in network devices. The device has an all-metal enclosure and therefore low EMI.
Features / filters | |
Output connector | RJ45 |
SFP module - port speed | 1,25 Gbps |
Transmission distance | Less then 1km |
Certification | FCC |
Copper ethernet cabling technology | 100BASE-T,1000BASE-T |
Ethernet interface type | Fast Ethernet, Gigabit Ethernet |
Ethernet LAN | Yes |
Interface type | SFP |
Maximum data transfer rate | 1250 |
Maximum operating temperature | 70 |
Maximum transfer distance | 100 |
Number of products included | 1 |
Power consumption (typical) | 1.05 |
SFP transceiver type | Copper |
Sustainability certificates | CE, RoHS |
Basic technical parameters | |
Transmission speed | Up to 1.25 Gbps |
Port | SFP 1000 BASE-T 1 Gbps RJ-45 |
Port range | 100 m |
Housing temperature during operation | 0°C to 70°C |
Port wiring | UTP/STP cat. 5 |
Power dissipation | 1,05 W |
User Manual [EN]. | Download |