Teltonika RUT955 | Industrial 4G LTE router | Cat.4, WiFi, Dual Sim, GPS, 1x WAN, 3X LAN, GPS router, RUT955 Z033B0



![Teltonika RUT955 | Industrial 4G LTE router | Cat.4, WiFi, Dual Sim, GPS, 1x WAN, 3X LAN, GPS router, RUT955 Z033B0 Ilość portów LAN4x [10/100M (RJ45)]](https://www.batna24.com/img2/200/330705_3.webp?20989284112)
Teltonika RUT955 LTE Router features an LTE module and provides WiFi connectivity. It is ahHighly secure and reliable industrial device equipped with Ethernet, digital and analogue input/output, RS232, RS485, GNSS (GPS), USB ports and a microSD slot.
The router provides high performance cellular communications with GPS location capabilities. RUT955 is equipped with connectivity redundancy through failover SIM thanks to Dual-SIM. External antenna connectors allow you to attach the desired antennas and easily find the best signal location.
External antenna connectors allow you to attach any LTE or WiFi antenna to make finding the best signal location as easy as possible.
Features / filters | |
Communication type | 4G/LTE, Wi-Fi, GPS, |
LTE category | Cat.4 (150Mb/s Download, 50Mb/s Upload) |
Maximum wireless transmission speed | 300 Mb/s |
Number of LAN ports | 4x 10/100BaseTX (RJ45) |
Operating frequency | 2.4 GHz, LTE, |
Wireless network standards | IEEE 802.11n |
Additional connectors / interfaces | RS232, RS485, |
Antenna gain | Under 10dbi |
Dual SIM | Yes |
IP Rating | IP30 |
LTE bands | B1 (2100MHz), B20 (800MHz), B28A (700 MHz), B3 (1800MHz), B7 (2600MHz), B8 (900MHz), B38 (2600MHz), B40 (2300MHz), B41 (2500 MHz), |
RAM memory | 128MB |
Type of device power supply | Passive PoE, Power supply, |
USB port | 1x USB |
Variant | RUT955 Z033B0 |
Basic general data | |
Manufacturer | Teltonika |
Model | RUT955 |
Type | LTE router |
Code medely | Z033B0 |
For regional use (for mobile network operators) | Europe, Middle East, Africa, Korea, Thailand |
Mobile connection | |
Mobile module | 4G (LTE) - Cat 4 up to 150 Mbps, 3G - up to 42 Mbps, 2G - up to 236.8 kbps |
SIM cards | 2 SIM cards, cases of automatic switching: weak signal, data limit, SMS limit, roaming, no network, network blockade, data connection error, SIM protection in idle state |
Status | Signal strength, SINR, RSRP, RSRQ, Bytes sent/received |
Bridge mode | Direct connection (bridge) between mobile ISP and device in LAN |
SMS | SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
Blacklist/Whitelist | Black/white list of operators |
Multiple PDNs (optional) | Ability to use different PDNs to access multiple networks and services |
Bandwidth management | Band lock, display of bandwidth status in use |
Wireless network | |
Wireless mode | IEEE 802.11b/g/n, Access Point (AP), Station (STA) |
WiFi | WPA2-Enterprise (with external/internal Radius Server), WPA2-PSK, WPA-PSK, WEP, MAC Filter |
WiFi security | WPA2-Enterprise - PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher, Client Separation |
SSID | SSID stealth mode and access control based on MAC address |
WiFi users | Up to 100 simultaneous connections |
Hotspot | Captive portal (Hotspot), internal/external Radius server , embedded in a configurable landing page |
Ethernet | |
WAN | 1 x WAN (LAN configurable) 10/100 Mbps, IEEE 802.3, IEEE 802.3u compliant, supports auto MDI/MDIX |
LAN | 3 x LAN ports, 10/100 Mbps, IEEE 802.3, IEEE 802.3u compliant, MDI/MDIX automatic support |
Network | |
Routing | Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2) |
Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT |
VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
Call monitoring | Ping Reboot, Periodic Reboot, LCP and ICMP for connection control |
Firewall | Port forwarding, network traffic rules, customs rules |
DHCP | Static and dynamic IP allocation, DHCP Relayd |
QoS | Traffic prioritization by source/destination, service, protocol or port, traffic prioritization by source/destination, service, protocol or port, WMM, 802.11e |
DDNS | >25 service providers supported, others can be configured manually |
Network backup | VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as a backup, using automatic failover |
Load balancing | Balancing Internet traffic across multiple WAN connections |
NetSnapper (optional) | Mobile connection management, VPN client data compression (not available in standard Firmware) |
SSHFS ( optional) | Possibility to install remote file system via SSH protocol (not available in standard Firmware) |
Security | |
Authorization | Shared key, digital certificates, X.509 certificates |
Firewall | Pre-configured firewall rules can be enabled via web-ui, unrestricted firewall configuration via CLI; DMZ; NAT; NAT-T |
Prevention of attacks | DDOS prevention (SYN protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
WiFi security | WPA2-Enterprice - PEAP, EAP-TLS, TLS, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, Client separation |
VLAN | Port-based and tag-based VLAN separation |
Limiting | Custom data limits for both SIM cards |
WEB Filter | Black list to block unwanted websites, white list to determine allowed sites |
Access control | Flexible access control for TCP, UDP, ICMP packets, MAC address filters |
VPN | |
OpenVPN | Ability to run multiple clients and servers simultaneously, 12 encryption methods |
OpenVPN encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPsec | IKEv1, IKEv2, supports up to 4 IPsec VPN tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
GRE | GRE tunnel |
PPTP, L2TP | Client/server services can run simultaneously |
Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without changing program code. |
SSTP | SSTP client instance support |
Monitoring and management | |
WEB UI | HTTP/HTTTPS, status, configuration, FW update, CLI, troubleshooting, event log, system log, kernel log |
FOTA | Remote firmware update from server, automatic notifications. |
SSH | SSH (v1, v2) |
SMS | SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET |
TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AV systems |
MQTT | MQTT Broker, MQTT publisher |
SNMP | SNMP (v1, v2, v3), SNMP trap |
JSON-RPC | API management over HTTP/HTTPS |
MODBUS | MODBUS TCP status/control |
RMS | Teltonika Remote Management System (RMS) - a system for remote management of Teltonika devices |
System characteristics | |
CPU | Atheros Wasp, MIPS 74Kc, 550MHz |
RAM | 128MB, DDR2 |
FLASH memory | 16MB SPI Flash |
Software / Configuration | |
WEB UI | Software update from file, software check on server, configuration profiles, configuration backup, restore point |
FOTA | Software update/configuration from server |
RMS | Software / configuration update for multiple devices |
Save settings | Software update without losing current configuration |
Operating system | RutOS (OpenWrt based Linux OS) |
Supported languages | Busybox shell, Lua, C |
Development tools | GPL package with included graphical environment |
Location | |
GNSS | GPS, GLONASS, BeiDou, Galileo and QZSS |
Coordinates | GNSS coordinates via WebUI, SMS, TAVL, RMS |
NMEA | NMEA 0183 |
NTRIP | NTRIP (Networked Transport of RTCM via Internet Protocol) |
Server software | Supported server software TAVL, RMS |
Geolocation of mobile phone networks | GPS-less location, obtains approximate location based on mobile tower on RMS |
Geofencing | Configurable multiple geofence zones |
Serial Ports | |
RS232 | DB9 connector, full RS232 (with RTS, CTS) |
RS485 | RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 bandwidth |
Serial functions | Console, Serial over IP, Modem, Modbus gateway, NTRIP client |
Inputs/Outputs | |
Inputs | 3 x Input (0 - 3 V digital input / 0 - 30 V galvanically isolated digital input / 0 - 24 V analog input) |
Outputs | 2 x output (30 V, 250 mA digital open collector output / 40 V, 4 A SPST relay output) |
Events | SMS, EMAIL, RMS |
USB | |
Data transmission speed | USB 2.0 |
Applications | Samba share, custom scripts |
External devices | Possibility to connect an external hard drive, flash memory, additional modem, printer |
Storage formats | FAT, FAT32, NTFS |
SD card | |
Physical size | Micro SD |
Applications | Samba share, custom scripts |
Capacity | Up to 32GB |
Power supply | |
Connector | 4-pin industrial DC power connector |
Input voltage range | 9 - 30 VDC (4-pole industrial outlet), reverse polarity protection; surge protection >31VDC 10us max. |
PoE (passive) | Passive PoE in backup pairs. Power supply via LAN port, not compatible with IEEE802.3af and 802.3at standards |
Power consumption | < 2W Idle, < 7W Max. |
Physical interfaces (Ports, LEDs, ANTENES, BUTTONS, SIM) | |
Ethernet | 4 RJ45 ports, 10/100 Mbps |
LEDs | 1 x bi-color connection status LED, 5x connection strength LED, 4x LAN status LED, 1x power LED |
SIM | 2 x SIM slots (Mini SIM - 2FF) 1.8V/3V |
Power supply | 4-pin industrial DC power connector |
Input/Output | 10-pin industrial socket for inputs/outputs |
Antennas | 2 x SMA for LTE, 1 x SMA for GNNS, 2 x RP-SMA for WiFi antennas |
USB | USB A socket for external devices |
SD card | Micro SD card slot |
RS232 | DB9 socket for fully functional RS232 |
RS485 | 6-pin industrial jack for 2-/4 wire RS485 |
Reset | Reset/Return to factory settings button |
Physical specification | |
Housing material | Aluminium housing, plastic panels |
Dimensions | 80 mm x 106 mm x 46 mm |
Weight | 280 g |
Mounting options | DIN rail (can be mounted on two sides) |
Work environment | |
Operating temperature | -40 °C to 75 °C |
Operating humidity | 10% to 90% non-condensing |
Protection classification | IP30 |
MTBF | 230000 h |
Regulations and Certifications | |
Regulations | CE/RED, FCC, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance (in progress) |
Operator | AT |
Vehicle | ECE R10 (E-mark), ECE R118 |
EMI Immunity | |
Standards | Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0, FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014) |
ESD | EN61000-4-2:2009 |
RS | EN 61000-4-3:2006 A1:2008 A2:2010 |
EFT | EN 61000-4-4:2012 |
Surge protection | EN 61000-4-5:2006 |
Transients and surges | ISO 7632-2:2004 |
CS | EN 61000-4-6:2009 |
DIP | EN 61000-4-11:2004 |
RF | |
Standards | EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1, EN 303 413 V1.1.0, AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017 FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017), RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1 |
Security | |
Standards | IEC 60950-1:2005 (Second Edition) Am 1:2009 Am 2:2013 AS/NZS 60950.1:2015 EN 50665:2017, EN 62311:2008 FCC 47 CFR Part 1 1.1310 RSS-102 Issue 5 (2015) |
Environmental | |
Ingress Protect | LST EN 60529:1999 A1 AC:2002 |
Vibrations | Class guideline-DNVGL-CG-0339:2016, EN 60068-2-6:2008 |