EN
Ubiquiti UF-MM-1G is a pair of SFP inserts from the U Fiber series operating at 550 nm, which are used for data transmission through multimode fibers. Each module has 2 LC ports. Ubiquiti SFP UF-MM-1G inserts offer transmission speed 1.25 Gbps and range of to 550 m. Multi-mode SFP inserts are ideal for use in the existing network infrastructure or to establish a new installation.
Features / filters | |
Output connector | LC |
SFP module - port speed | 1,25 Gbps |
Transmission distance | Less then 1km |
Fiber optic connector | LC |
Fiber ports quantity | 2 |
Harmonized System (HS) code | 85369010 |
Interface type | SFP |
Maximum data transfer rate | 1250 |
Maximum transfer distance | 550 |
Multi-mode fiber (MMF) supported | Yes |
Number of products included | 2 |
Numbers of pieces in the package | 2-pack |
Product colour | Aluminium |
SFP transceiver type | Fiber optic |
Type of SFP duplex | Physical (two fibers) |
Wavelength | 850 nm, 850, |
Basic technical parameters | |
Transmission speed | 1.25 Gbps |
Distance | 550 m |
Type of module | SFP |
Output connector | 2 x LC |
Type of transmission | Multi-Mode |
Duplex type | Physical (two fibres) |
Wavelength | 850 nm |
Declaration of conformity | Download |
For convenient multifunctional connections that go beyond the 100-meter Ethernet cable limit, UF-MM-10G can be used at a distance of up to 300 m with a speed of up to 10 Gb/s or UF-MM-1G at a distance of up to 550 m with a speed of up to 1 Gb/s.
SFP+ is an extension of the SFP standard adapted to a transmission rate of 10 Gbit/s.
We check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then we select the fiber optic cable. Single mode fiber is usually used over longer distances, while multimode fiber is used over shorter distances.